1. <table id="2koyn"><code id="2koyn"></code></table>

            无遮挡高潮国产免费观看
            Vacuum furnace
            n_bb1
            current location: Home?>>? 新聞資訊 >> Technical support

            Contact information

            Taicang Huarui Vacuum Furnace Co., Ltd
            Address: No.1, Nanzhuan Road, Shuangfeng town, Taicang City
            Contact person: Zheng Xinghua
            Mobile: 13285178098
            Contact: Guan Zhanlong
            Mobile: 18606226806
            Contact person: Zheng Shuai
            Mobile: 13285179528
            Tel: 0512-88826556
            Fax: 0512-53630028
            Email: 1306769879@qq.com
            National Service Hotline:
            0512-53630028
            Website: www.bkktraining.com

            Maintenance of vacuum furnace

            Release date: 2014-01-21 00:00 source: http://www.bkktraining.com Click:

            Maintenance of vacuum furnace

                   1. Vacuumize according to PLC program: close all vacuum valves tightly, start mechanical pump, open the low vacuum valve leading to the furnace body, i.e. upper disc valve after it operates normally (about 1-2 min), and vacuumize the furnace body in advance;
            2. Vacuumize according to PLC program: open the lower disc valve to extract air from the diffusion pump. When the vacuum degree reaches below 15 PA, the system will automatically open the diffusion pump for preheating. Generally, after 45 minutes or so, the diffusion pump starts to work, the upper disc valve can be closed, and the main block valve can be opened at the same time until the vacuum degree reaches above 1.33 × 10 Pa, then the heating button can be opened to heat the sample.
            The maintenance of vacuum furnace can guide the equipment operator to carry out the daily maintenance of the equipment according to the spot inspection cycle with correct inspection methods and tools within the scope of responsibility; the operator shall carefully fill in the daily maintenance record of heat treatment equipment according to the maintenance manual every day, which shall be checked and reviewed by the team leader, and collected and filed by the maintenance personnel. After the complete set of equipment is installed according to the technical requirements, if there is no missing part and there is good grounding, it can be debugged and accepted according to the following items.

            Related tags: 真空爐

            National Hotline

            0512-53630028
            Address: No.1, Nanzhuan Road, Shuangfeng
            town, Taicang, Suzhou, Jiangsu
            Email: 1306769879@qq.com

            Pay attention to us
            Copyright ?http://www.bkktraining.com/en/ Taicang Huarui Vacuum Furnace Co., Ltd 專業從事于Vacuum furnace,Vacuum gas quenching furnace,Vacuum oil quenching furnace, 歡迎來電咨詢!
            Welcome to leave us a message
            Please enter your message here, we will contact you as soon as possible。
            Contact person
            Landline / mobile number
            Xiangyun platform technical support