1. <table id="2koyn"><code id="2koyn"></code></table>

            无遮挡高潮国产免费观看
            Vacuum furnace
            n_bb1
            current location: Home?>>? 新聞資訊 >> Company news

            Contact information

            Taicang Huarui Vacuum Furnace Co., Ltd
            Address: No.1, Nanzhuan Road, Shuangfeng town, Taicang City
            Contact person: Zheng Xinghua
            Mobile: 13285178098
            Contact: Guan Zhanlong
            Mobile: 18606226806
            Contact person: Zheng Shuai
            Mobile: 13285179528
            Tel: 0512-88826556
            Fax: 0512-53630028
            Email: 1306769879@qq.com
            National Service Hotline:
            0512-53630028
            Website: www.bkktraining.com

            General knowledge of vacuum heat treatment

            Release date: 2014-01-24 00:00 source: http://www.bkktraining.com Click:

            General knowledge of vacuum heat treatment


              1. When titanium alloy is treated in vacuum furnace, nitrogen should not be used as cooling gas, because titanium and nitrogen react at high temperature to form golden titanium nitride.
            2. The movable connection part of the vacuum furnace is all sealed with O-ring, and this part is cooled by water.
            3. When the workpiece is quenched in vacuum, vacuum quenching oil shall be used, which has low saturated vapor pressure.
            4. The maintenance of the vacuum furnace shall be in the state of vacuum or pure nitrogen filling to avoid air absorption and moisture absorption when not in use.
            5. The pressure rise rate of domestic vacuum furnace shall not be greater than 1.33pa/h, and that of some foreign enterprises shall be 0.67pa/h
            6. Vacuum heating is mainly based on radiation, and the distance between workpieces in the furnace should be kept.
            7. During the heating process, the workpiece and furnace materials will be deflated to reduce the vacuum.
            8. The heating temperature of vacuum tempering, vacuum annealing, vacuum solution treatment and vacuum aging is generally the same as that of conventional treatment.
            9. The vacuum tempering furnace shall be equipped with quick cooling device. The pressure of cooling water shall be greater than 0.2MPa, and the flow shall be adjustable.
            10. Cooling gas: generally, 99.995% pure nitrogen is used for steel, 99.999% nitrogen or argon is used for superalloy and 99.995% argon is used for titanium alloy.
            11. Temperature rise: after the workpiece is put in, it can be heated only when it is pre pumped to 6.67pa



            Related tags: 真空爐

            National Hotline

            0512-53630028
            Address: No.1, Nanzhuan Road, Shuangfeng
            town, Taicang, Suzhou, Jiangsu
            Email: 1306769879@qq.com

            Pay attention to us
            Copyright ?http://www.bkktraining.com/en/ Taicang Huarui Vacuum Furnace Co., Ltd 專業從事于Vacuum furnace,Vacuum gas quenching furnace,Vacuum oil quenching furnace, 歡迎來電咨詢!
            Welcome to leave us a message
            Please enter your message here, we will contact you as soon as possible。
            Contact person
            Landline / mobile number
            Xiangyun platform technical support